Home > Connect Error > Connect Error 239

Connect Error 239

Clear all errors and test the dispenser by completing several test dispenses. Fill if needed. Verify the quality of your incoming TCP-IP connection and your TCP-IP configuration, (i.e. This is a Triton Connect error. 1. have a peek at this web-site

Examine the timing wheel for physical defect. This error is usually associated with “”unfit”” currency or an empty cassette. 1. Starting Oracle Web Listener when HP-UX boots. 10. Can only be cleared in Diagnostics>Keypad>Clear Tamper. browse this site

Note, if the EJ is connected to the load port of the 9100 main board, permanent damage may result. 2. Remove any unacceptable currency from the cassette. 2. Reset the error. Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support 114 Exit blocked during purge 1.

  • Remove any jammed currency. 2.
  • Verify that all DC voltages applied to the printer control board are correct.
  • If the voltages are not within tolerance, the cable or power supply may be defective. 4.
  • Inspect the printer data cable for damage.
  • Simon Top error 239 from Oracle Listener/HPUX by Colin Wy » Tue, 06 Jun 1995 04:00:00 : TNS-12545 : TNS :name lookup failure : TNS-12560 : TNS :protocol
  • Then it will go “out of service”” for and error code 195 “out of paper”. 185 Telephone number not configured Enter Management Functions and configure the telephone number. 186 Bill Size
  • well I created the *.ora files on my PC using the network configurator and copied them to the \etc directory.

Reset the Cash Dispenser by turning OFF the AC power switch for a few seconds and switching it back ON. 2. Sign in to comment Contact GitHub API Training Shop Blog About © 2016 GitHub, Inc. Clear all errors and test the dispenser with a live transaction. Clear any jammed currency. 2.

Remove jammed currency. 2. Synchro closed this Aug 11, 2014 Sign up for free to join this conversation on GitHub. a sudden error concerning the listener 13. Get More Info Test the dispenser by completing several test dispenses with the test dispense command.

Clear the error. All rights reserved. Have a nice synthesis Eilert Message 2 of 2 (3,913 Views) Reply 0 Kudos « Message Listing « Previous Topic Next Topic » Download XilinxGo Mobile app Connect on LinkedIn Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support 110 Trailing edge time- out at exit. 1.

Test the dispenser by completing several test dispenses. 3. https://scn.sap.com/thread/3255404 Clear any jammed currency.2. Steps to ReproduceClarifying InformationA new firewall was installed a week ago, but it was all working fine until now. The database server was recently rebooted, which somehow triggered the new firewall configuration If these actions have no effect, replace the dispensing mechanism. 203 SPED keypad is not replying to main board Status valid only for units with SPED keypad device installed. 1.

If the currency is in “”fit”” condition and the error condition persists, consider replacing the note cassette or the dispensing mechanism. http://iembra.org/connect-error/connect-error-openssl-not-available-sap.php Inspect main board to electronic journal communication cable for damage. If the error clears, put the cash dispenser in service. If the status clears and the return code are normal place the cash dispenser in service.

Try this: \n"; } else { while (!feof($fp)) { echo fgets($fp, 1024); } fclose($fp); } That should show Make sure they are seated at the printer control board and not damaged. 6. Make sure the connectors are seated securely on the main board and on the electronic journal. 4. http://iembra.org/connect-error/connect-error-183-vodafone.php Note: Dispenser Status (Click Counts) should be run and available before contacting Tech Support 123 Hardware Error 1.

Verify that main board to electronic journal and the electronic journal to dispenser cables securely seated at both ends of the cable. Make sure the connectors are seated securely on the main board and on the electronic journal. 2. If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly 5.

Purge the dispenser using the purge command.

If the problem persists, replace the dispensing mechanism 100 Good operation No Action Necessary. Terms of Use Privacy Policy Trademarks License Agreements Careers Offices Kamran Agayev's Oracle Blog Oracle Certified Master Home Step by Step Oracle guides Oracle VIDEO Tutorials Presentations My Oracle e-books Exclusive If the error clears, put the cash dispenser in service. 3. Inspect electronic journal to dispenser communication cable for damage.

Verify that the diverter moves freely. 3. when completing a cassette close function.) to keep it from filling up. Clear the error. have a peek here Verify that main board to electronic journal and the electronic journal to dispenser cables securely seated at both ends of the cable.

Thanks for your support. Reset the Cash Dispenser by turning OFF the AC power switch for a few seconds and switching it back ON.